Showing posts with label PCB. Show all posts
Showing posts with label PCB. Show all posts

Friday, 3 February 2023

Study on Bioremediation of Polychlorinated Biphenyls (PCB) in Soil and Sediments by Microorganisms and Plants| Chapter 1 | Research Highlights in Agricultural Sciences Vol. 8

 

The present study aimed to investigate the biological remediation of polychlorinated biphenyls (PCB) in the soil and sediments by microorganisms and plants. This chapter focuses on the possible trends of remediation of PCBs in the environment and the methodologies applied. It also reviewed the merits and demerits of using plants and microorganisms as biological detoxification agents. The last two decades have seen an increase in interest in biological methods for cleaning the environment, particularly the soil. For centuries, fungi and bacteria have served as the environment's natural detoxification systems for pollutants. Recent studies have demonstrated that using plants and microorganisms in the proper ratios and techniques will produce a desirable and better result for the detoxification of environmental contaminants, and most importantly, the natural environment won't be harmed because some of the processes are environmentally friendly. It is common knowledge that various unchecked human activities and chemicals in the biosphere have severely contaminated the environment. If left unchecked, this acute and widespread contamination of the air, soil and water by metals, chemicals and metalloids will be harmful to people and other living things. Despite the numerous steps taken to control the presence pf these compounds in the environment, their widespread presence and other members of the well-known class known as persistent organic pollutants (POPs), which share similar chemical, toxicological, and environmental characteristics, continues to rise. However, the hydrophobic nature and characteristics of polychlorinated biphenyls (PCBs) tend to be much less responsive to bioremediation strategies. The study also highlighted the possible improvement measures on the combination of plants and microorganisms in bioremediation, thereby filling the gap left behind by the conventional methods of remediation with its enormous limitations and disadvantages to enable the triumph of agricultural practices. This chapter focuses on the possible trends of remediation of PCBs in the environment and the methodologies applied. It also discusses the advantages and disadvantages of using plants and microorganisms as biological detoxification agents.

Author(s) Details:

Raymond Oriebe Anyasi,
Department of Environmental Sciences, University of South Africa, Florida Campus, Rodepoort, South Africa.

Harrison Ifeanyichukwu Atagana,
Institute for Nanotechnology and Water Sustainability, University of South Africa, Florida Campus, Rodepoort, South Africa.

Please see the link here: https://stm.bookpi.org/RHAS-V8/article/view/9257

Saturday, 17 September 2022

The Design of an Automated Etching System| Chapter 9 | Technological Innovation in Engineering Research Vol. 8

 The point of this study is the plan of a computerized scratching framework, Drawing is a subtractive technique utilized for the creation of printed circuit sheets (PCBs) where corrosive is utilized to eliminate undesirable copper from a pre-assembled cover. The manual technique is restricted to few sheets and is probably going to be wasteful. Beside that, openness to certain kinds of etchants might be hurtful to one's wellbeing. Then again, the machines accessible for this intention are cleaner and quicker, and they can draw numerous sheets on the double, yet they are very costly. This habitually deters limited scope Printed Circuit Board (PCB) makers from buying them. Nonetheless, the mechanized scratching framework depicted here looks to offer a method to complete the drawing system for a PCB board in a basic, spotless, safe, and conservative way. The printed circuit board utilizes conductive lines, cushions, and highlights scratched from copper sheets covered onto a non-conductive substrate to help and electrically interface electronic parts precisely.


Author(s) Details:

J. O. Olowoleni,
Department of Electrical and Information Engineering, School of Engineering, Covenant University Ota, Nigeria.

C. O. A. Awosope,
Department of Electrical and Information Engineering, School of Engineering, Covenant University Ota, Nigeria.

A.U. Adoghe,
Department of Electrical and Information Engineering, School of Engineering, Covenant University Ota, Nigeria.

A. F. Agbetuyi,
Department of Electrical and Information Engineering, School of Engineering, Covenant University Ota, Nigeria.

V. Oguntosin,
Department of Electrical and Information Engineering, School of Engineering, Covenant University Ota, Nigeria.


C. A. Halin,
Department of Electrical and Information Engineering, School of Engineering, Covenant University Ota, Nigeria.

Please see the link here: https://stm.bookpi.org/TIER-V8/article/view/8256