Improvement of the Manufacturing Process of Active Pharmaceutical Ingredients | Chapter 2 | Research and Developments in Engineering Research Vol. 7

This work aims to resolve and implement improvements in supplies integrated into result processes in pharmaceutical workshops for the production of alive pharmaceutical elements (API). In the project, studies were carried out utilizing the finite piece method (FEM) and usual structural design, to test the feasibility of the picked solutions. Then, the cost study was carried out, and the benefits and results of the new supplies were presented. It was attainable to conclude that the projected equipment illustrates advantages at an fitting, hygienic and efficient level compared to the original one, which interprets into an increase of the company’s competitiveness in the pharmaceutical advertise.

Author(s) Details:

A. C. P. Soares,
Departamento de Engenharia Mecânica, Instituto Superior de Engenharia do Porto, Instituto Politécnico do Porto, R. Dr. António Bernardino de Almeida, 431, 4200-072 Porto, Portugal.

R. D. S. G. Campilho,
Departamento de Engenharia Mecânica, Instituto Superior de Engenharia do Porto, Instituto Politécnico do Porto, R. Dr. António Bernardino de Almeida, 431, 4200-072 Porto, Portugal and INEGI – Pólo FEUP, Rua Dr. Roberto Frias, 400, 4200-465 Porto, Portugal.

M.S. Kirgiz,
Departamento de Engenharia Mecânica, Faculdade de Engenharia da Universidade do Porto, Rua Dr. Roberto Frias, s/n, 4200-465 Porto, Portugal.

M. V. Kumar,
Department of Civil Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India.

R. Alzein,
Department of Civil Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India.

Please see the link here: https://stm.bookpi.org/RADER-V7/article/view/11702

Quality Improvement in the Automotive Components Industry by Innovative 3D Scanner Solution | Chapter 1 | Research and Developments in Engineering Research Vol. 7

This work aims to evolve and validate a solution for control of product quality in the automotive industry while attractive full advantage of the concerning details factors given by the equipment secondhand. It deals with researching and administering a three-dimensions (3D) scanning in of documents in product quality listening tasks of a door committee manufacturing process. Pilot studies were carried out to evaluate the real capabilities of the supplies and determine questions that could arise when climbing the process for a real result of car door panels. The exercise and final results are also illustrated in this work, show that it is possible to develop a adaptable equipment accompanying multiple applications and administer it in the automotive industry.

Author(s) Details:

L. S. Gonçalves,
ISEP – School of Engineering, Polytechnic of Porto, R. Dr. António Bernardino de Almeida, 431, 4200-072 Porto, Portugal.

R. D. S. G. Campilho,
ISEP – School of Engineering, Polytechnic of Porto, R. Dr. António Bernardino de Almeida, 431, 4200-072 Porto, Portugal and INEGI – Pólo FEUP, Rua Dr. Roberto Frias, 400, 4200-465 Porto, Portugal.

M. S. Kirgiz,
Department of Civil Engineering, Faculty of Engineering and Architecture, T.C. Istanbul Gelisim University, Avcllar, Istanbul 34310, Turkiye.

M. V. Kumar,
Department of Civil Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India.

J. C. J. Raj,
Department of Civil Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India.

Please see the link here: https://stm.bookpi.org/RADER-V7/article/view/11701