Showing posts with label carbonization. Show all posts
Showing posts with label carbonization. Show all posts

Saturday, 29 November 2025

Gasification of Raw, Roasted and Carbonized Cashew Shells in a Fixed-Bed Co-current Gasifier | Chapter 2 | Current Research on Geography, Earth Science and Environment Vol. 4

 

The utilization of agricultural residues for power generation is an opportunity to reduce fossil fuel usage and foster a sustainable circular economy. The gasification of agricultural residues in some localities in Burkina Faso has made it possible to access electricity. However, the majority of gasifiers in operation in Burkina Faso are shut down, for technical reasons and because of the lack of mastery of the technology. The utilization of agricultural residues for power generation is an opportunity to reduce fossil fuel use and foster a promotion of renewable energy.  The present study focuses on the improvement of gas quality by gasification of raw and cashew shells, heat treatment by roasting and carbonization. The gasifier is a fixed-bed, co-current batch mode, with a throat. It has a thermal power of around 30 kW. It meets the need for low electrical power of the order of 10kWe. It has a double wall with a height of 153 cm and a diameter of 50 cm, and a double air injection. Improving the quality of the gas, consisting of reducing the balsam content contained in the raw shells. As well as the improvement of the physico-chemical characteristics of the shells. And this is done through the roasting and carbonization process. The tests carried out aim to evaluate the energy performance of the gasifier and analyse the gas composition resulting from the gasification of raw, roasted and carbonized cashew shells. Four Types K thermocouples, with a measuring range of -50°C to 400°C and class 2 accuracy in accordance. The parameters studied are the energy efficiency of the gasifier and the energy capacity of the gas. Four type K thermocouples, with a measuring range of −50˚C to +400˚C and class 2 accuracy in accordance with standard EN 60584-2, are connected to a data logger to monitor the temperature inside the reactor. The study showed that the energy yields of the gasifier by gasification of raw, roasted and carbonized hulls are respectively 47.5, 28.32 and 31.48%. The specific production rate of the gas is 28.3, 132.76 and 155.32 kg/m2.h respectively for raw, roasted and charred hulls. The gasification times of raw, roasted and charred bulls are 224.33 respectively 201 and 211 minutes. The composition of syngas shows that the gas produced from cashew shells is low in energy. Indeed, the LHV of gas from the raw, roasted and carbonized hulls are 3.1, respectively; 2.1 and 2.87 MJ/N.m3. The study of the gasification of raw and heat-treated hulls shows that the quality of the gas is improved, as is the energy performance of hull gasification. However, the Lower Heating Value of the gas from pre-treated hulls is not improved by torrefaction and carbonization of the hulls. The study concluded that gasifying cashew nut shells—especially those discarded by processing units—can be valuable for heat and electricity production.

 

 

Author(s) Details

Bénéwindé Edwige 2ème Jumelle Ouédraogo
Institut de Recherche en Sciences Appliquées et Technologies (IRSAT), Centre National de la Recherche Scientifique et Technologique (CNRST), Ouagadougou, Burkina Faso and Laboratoire de Physique et de Chimie de l’Environnement (LPCE), Université Joseph KI-ZERBO, Ouagadougou, Burkina Faso.

 

Gado Harouna Ibrahim
Faculté des Sciences et Technique, Université Dan Dankoulodo de Maradi, Maradi, Niger.

 

Wend-Kuni Gisele Bilgo
Laboratoire de Physique et de Chimie de l’Environnement (LPCE), Université Joseph KI-ZERBO, Ouagadougou, Burkina Faso.

 

Tizane Daho
Laboratoire de Physique et de Chimie de l’Environnement (LPCE), Université Joseph KI-ZERBO, Ouagadougou, Burkina Faso.

 

Oumar Sanogo
Institut de Recherche en Sciences Appliquées et Technologies (IRSAT), Centre National de la Recherche Scientifique et Technologique (CNRST), Ouagadougou, Burkina Faso.

 

Antoine Bere
Laboratoire de Physique et de Chimie de l’Environnement (LPCE), Université Joseph KI-ZERBO, Ouagadougou, Burkina Faso.

 

Please see the book here :- https://doi.org/10.9734/bpi/crgese/v4/6493

Tuesday, 13 February 2024

Application of Power Diode Laser on Leather Cutting and its Optimization to Reduce Carbonization Effect | Chapter 2 | Contemporary Perspective on Science, Technology and Research Vol. 5

A diverse selection of animal leathers, including cow, sheep, and buffalo, are utilized for the production of leather garments and commodities such as purses, wallets, and other personalized leather items. Traditionally, laser beams are generated using CO2 and Nd-YAG lasers. The high-power diode laser offers benefits such as its compact size, energy efficiency, long lifespan, and low operating expenses. Nevertheless, the elevated heat impact during laser leather machining leads to the unwanted occurrence of carbonization. Furthermore, the energy crisis is a significant issue that should be minimized as much as possible to promote energy conservation. This study aims to design and create a laser beam machining system that is energy efficient, utilizing the principles of Mechatronics Engineering. The objective of this study is the efficient utilization of power diode-based laser beam machining to reduce the carbonization effect and to enable better levels of energy-efficient machining. In this study, a diode-based laser beam machining system was developed and constructed using diode lasers to cut vegetable chrome tanned leather with power outputs of 2.5W, 5.5W, and 20W. The enhanced performance was attributed to the customizable characteristics of the diode laser actuation, which took the form of a circular shape with a variable diameter. Higher power density may be achieved by using a high power source with a smaller spot size in pulsed mode. Higher power density results in less contact time, leading to decreased carbonization.

Author(s) Details:

Tamer Mohamed Ahmed Khalaf,
Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia.

Khaja Moiduddin,
Advanced Manufacturing Institute, King Saud University, Riyadh 11421, Saudi Arabia.

Muthuramalingam Thangaraj,
Department of Mechatronics Engineering, SRM Institute of Science and Technology, SRM Nagar, Kattankulathur 603203, India.

Please see the link here: https://stm.bookpi.org/CPSTR-V5/article/view/13273