Showing posts with label PMMA. Show all posts
Showing posts with label PMMA. Show all posts

Saturday, 7 February 2026

Fabrication of Novel Guar Gum-g-poly (Methyl Methacrylate) Superabsorbent Nanocomposite, Its Characterisation, Swelling Properties and Investigation of Reaction Parameters | Chapter 7 | Chemical and Materials Sciences: Research Findings Vol. 6

 

Superabsorbent polymers are high-performance synthetic polymers having outstanding water-absorbing capacity. This chapter emphasises the fabrication of novel biopolymer-based superabsorbent nanocomposite using guar gum (GG) and methylmethacrylate (MMA) by free radical graft copolymerisation reaction with boric acid as a cross-linking agent and hydrogen peroxide as an initiator in a complete aqueous solution.  The fabricated superabsorbent nanocomposite has excellent water absorption capacity. Absorbency of the superabsorbent composite was measured by the free swelling method and calculated in terms of percentage swelling. Fourier transform infrared (FTIR) analysis was carried out to confirm the grafting of methyl methacrylate onto guar gum. The morphological study of the composite was carried out by scanning electron microscopy (SEM). Thermal gravimetric analysis (TGA) confirms the stability of the nanocomposite. The composite was characterised by X-ray diffraction (XRD) to study its crystalline nature. The water absorption capacity of the superabsorbent was measured in distilled water by the free swelling method as a function of percentage swelling and found to be 3000%. The effect of reaction parameters such as guar gum concentration, monomer concentration, initiator concentration, cross-linker concentration and temperature was investigated. The percentage swelling of the superabsorbent composite was studied at various pH values between 2.0 and 13.0. The swelling behaviour of the composite was also examined in saline solutions. The swelling behaviour of the composite was also examined in saline solutions. The result shows that swelling capacity is decreased by increasing the ionic strength of the swelling medium. This behaviour is because of the charge screening effect for monovalent cations as well as ionic crosslinking for multivalent cations. The prepared superabsorbent composite can be used in various applications like agriculture, horticulture, removal of toxic dyes, oil spill cleaning, etc.

 

 

Author(s) Details

Kartika Rathore
Applied and Environmental Chemistry Laboratory, Department of Chemistry, Jai Narain Vyas University, Jodhpur–342011, Rajasthan, India.

 

Sangeeta Loonker
Applied and Environmental Chemistry Laboratory, Department of Chemistry, Jai Narain Vyas University, Jodhpur–342011, Rajasthan, India.

 

Please see the book here :- https://doi.org/10.9734/bpi/cmsrf/v6/6852

Utilisation of GG-g-PMMA/bentonite Superabsorbent Composite for the Effective Removal of Eriochrome Black-T Dye by the Process of Adsorption | Chapter 6 | Chemical and Materials Sciences: Research Findings Vol. 6

 

Release of dyeing effluents into water is one of the major factors contributing to water pollution. Eriochrome black T (EBT) is a synthetic dye which causes serious water pollution and affects humans due to its carcinogenic nature. This chapter emphasises the removal of EBT by the utilisation of GG-g-PMMA/bentonite composite by the process of adsorption. The adsorption experiments were carried out batch-wise in acidic as well as alkaline media. The concentration of dye was determined using a UV-Visible spectrophotometer. The various reaction parameters, such as pH, dye concentration, time till adsorption was carried out and adsorbent dose, were thoroughly studied to optimise the conditions for the removal of dye using the composite. The results obtained indicate that the prepared composite showed the maximum percentage removal of 89 % at 6 pH value. Freundlich and Langmuir isotherms were employed to evaluate the adsorption property of the composite. The results obtained show that the adsorption of dye on the surface of the composite follows Langmuir adsorption. Pseudo-first-order and pseudo-second-order equations were applied for the kinetic study. The findings indicate that pseudo second order kinetic reaction clearly explains the data obtained on the basis of the correlation coefficient.

 

 

Author(s) Details

Kartika Rathore
Applied and Environmental Chemistry Laboratory, Department of Chemistry, Jai Narain Vyas University, Jodhpur–342011, Rajasthan, India.

 

Sangeeta Loonker
Applied and Environmental Chemistry Laboratory, Department of Chemistry, Jai Narain Vyas University, Jodhpur–342011, Rajasthan, India.

 

Please see the book here :- https://doi.org/10.9734/bpi/cmsrf/v6/6885

Tuesday, 20 July 2021

ZnO Growth on PMMA-Coated Glass by SolutionImmersion Method: Influence of Immersion Time towards the Optical Properties of ZnO | Chapter 4 | New Approaches in Engineering Research Vol. 5

 The effect of varying immersion times on ZnO growth on a PMMA-coated substrate was examined using the solutionimmersion technique. The spincoating method was used to coat PMMA polymer on a glass substrate. After that, the PMMA-coated substrate was prepared for non-immersion and immersion in zinc solution for four (4) and six (6) hours, respectively. Photoluminescence (PL), Raman Spectra, and Ultraviolet-Vis (UV-Vis) spectroscopy were used to analyse the film's optical properties. It was discovered that a shorter immersion duration (4 hours) resulted in increased PL and Raman intensity. In the case of UV-Vis measurement, however, the opposite was discovered.


Author(s) Details

A. Aadila
Faculty of Applied Sciences, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia and NANO-SciTech Lab, Centre for Functional Materials and Nanotechnology, Institute of Science, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia.

A. N. Afaah
Faculty of Applied Sciences, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia and NANO-SciTech Lab, Centre for Functional Materials and Nanotechnology, Institute of Science, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia.

N. A. M. Asib
Faculty of Applied Sciences, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia and NANO-SciTech Lab, Centre for Functional Materials and Nanotechnology, Institute of Science, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia.

R. Mohamed
Faculty of Applied Sciences, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia and Faculty of AppliedSciences, Universiti Teknologi MARA Pahang, 26400 Bandar Tun Razak Jengka, Pahang, Malaysia.

Prof. Ts. Dr-Eng. M. Rusop
Faculty of Applied Sciences, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia and NANO-Electronic Centre, Faculty of Electrical Engineering, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia.

Assoc. Prof. Dr. Z. Khusaimi
Faculty of Applied Sciences, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia and NANO-SciTech Lab, Centre for Functional Materials and Nanotechnology, Institute of Science, Universiti Teknologi MARA, 40450 Shah Alam,Selangor, Malaysia.

View Book :- https://stm.bookpi.org/NAER-V5/article/view/2085