Thursday 16 July 2020

Water Content Effect on Shear Strength Parameters in Coir Fiber Reinforced Pilani Soil: Recent Observations | Chapter 1 | Recent Developments in Engineering Research Vol.1

Recently, much work has been done on strength deformation behaviour of fiber reinforced soil and it has been established beyond doubt that addition of fiber in soil improves the overall engineering performance of soil. Fiber reinforced soil is effective in all types of soils (i.e. sand, silt and clay). Use of natural fibers in civil engineering construction practice is often advantageous as they are cheap, locally available, biodegradable, and ecofriendly. Among the available natural fibers (jute, coir, bamboo, etc.), coir is produced in large quantities in South Asian countries, such as India, Ceylon, Indonesia, Philippines, etc. and has better mechanical properties, such as tensile strength. In this paper, results on the cohesion and angle of internal friction behavior (obtained from direct shear testing) of local soil reinforced with coir fibers are presented at varied water contents. Soil sample reinforced with randomly distributed coir fibers of 2.5 cm length and 2.85 mm to 0.64 mm average diameter range (measured using screw gauge) were made for direct shear testing at 0.5% fiber content. Testing was done at four different water contents. The results show that cohesion increased and angle of internal friction decreased with increase in water content. Unreinforced in-situ local soil has negligible cohesion and angle of internal friction around 280 under similar direct shear testing conditions. Practical significance of the study has also been discussed. 

Author (s) Details

Kamalesh Kumar
Department of Civil Engineering, Birla Institute of Technology and Science, Pilani - 333031, Rajasthan, India.

Gada Vivek
Department of Civil Engineering, Birla Institute of Technology and Science, Pilani - 333031, Rajasthan, India.

View Book :-
http://bp.bookpi.org/index.php/bpi/catalog/book/205

No comments:

Post a Comment