Analyze the Bio-Thermal Behavior of the Human Eye Based on the Heat Conduction Law with One Relaxation Time | Chapter 10 | New Approaches in Engineering Research Vol. 12

The environment and physiological factors influence thermal processes in human tissues, such as the multi-layered human eye. This work developed a mathematical model of the human eye that considers variations in blood perfusion, porosity, evaporation rate, and ambient temperatures based on a non-Fourier heat conduction rule with correct boundary and interface conditions. The numerical solution was derived using a direct technique and MAPLE 17 software, with the results shown in the figures. The impact of various values of the relaxation times factors on the temperature value in each layer of the human eye was initially investigated. Blood perfusion, porosity, evaporation rate, duration, and ambient temperatures have all been discussed in relation to the thermal wave passing through the human eye layers; they all have a significant impact on the thermal wave going through the human eye layers. In terms of validity, the results of this model corresponded with those of other studies.

Author (S) Details

Hamdy M. Youssef
Department of Mathematics-Faculty of Education, Alexandria University, Alexandria, Egypt and Mechanical Engineering Department, College of Engineering and Islamic Architecture, Umm Al-Qura University, Makkah, 21955, KSA.

Alaa A. El-Bary
Basic and Applied Science Institute, Arab Academy for Science, Technology and Maritime Transport, P.O. Box 1029, Alexandria, Egypt.

View Book :- https://stm.bookpi.org/NAER-V12/article/view/3844

Performance Evaluation of a Prototype Solar Dryer against the Conventional Sun-drying System in Nigeria: A Scientific Approach | Chapter 8 | Recent Advances in Science and Technology Research Vol.5

Aims: The objective of this paper is to develop a rectangular solar dryer box in which grains are dried
by direct radiation through the transparent walls and roof of the cabinet and by the heated air from the
solar collector. The temperature development of the dryer is also evaluated.
Study Design: For the development of a rectangular solar dryer system and analysis of its
performance against a conventional sun-drying system in the rural communities in Nigeria.
Place and Duration of Study: Department of Mathematical and Physical Sciences, College of Basic
and Applied Sciences, Samuel Adegboyega University, Ogwa, Edo State, Nigeria; between July and
December 2014.
Methodology: The dryer is made of wood with a box-like drying chamber with the top cover plate
made of tempered glass of 5 mm. This is where the solar energy is trapped and channeled into the
drying chamber. Air passing through the collector is heated. The collector consists of a glass cover
plate, an absorber plate and insulator. A colorless glass of 5 mm thickness is used for the cover plate.
It is 30 cm long and 15 cm wide. It traps heat from the sun and prevents it from escaping. It is placed
4 cm above the absorber plate, this collects solar radiation. The absorber plate is made of aluminum
sheet painted black measuring 30 cm by 15 cm. It is placed below the cover plate to absorb incident
solar radiation transmitted by the glass cover plate and heats the air passing between it and the cover
plate.
Results: We evaluated the constructed solar dryer performance using 5kg of maize cobs. Savings in
time were achieved as against open conventional sun drying, it took 2 days for the maize cobs to dry
to a stabilized moisture content of 24.3 g from 30.3 g using the constructed passive solar dryer while it
took 6 days to dry the same cobs to 25.4 g under the open conventional sun drying system.
Conclusion: The passive solar dryer dries grains faster than the open conventional system i.e.
sunlight. Since the developed dryer does not use electricity, it can be used by farmers in rural
communities. Physical observation showed that, the maize cobs in the dryer looked cleaner than
those that were sun dried.

Author (s) Details

Jackson Akpojaro
Department of Mathematical Sciences, Faculty of Basic and Applied Sciences, University of Africa, Toru-Orua, Bayelsa State, Nigeria.

Matthew Oyeyemi
Department of Mathematical Sciences, Faculty of Basic and Applied Sciences, University of Africa, Toru-Orua, Bayelsa State, Nigeria.

View Book :- https://bp.bookpi.org/index.php/bpi/catalog/book/241