Bandwidth Distribution Algorithm of Applications in LTE-Femtocell Network: Advanced Study | Chapter 4 | Emerging Trends in Engineering Research and Technology Vol. 5

 

The wireless technology demand is growing exponentially for higher data rate more than 1Gbit/s. The capacity of wireless networks must grow continuously in order to satisfy the demand of traffic from users and applications. Long-Term Evolution (LTE) and LTE-Advanced (LTE-A) have been standardized by 3GPP to target data rate of 100Mbits/s in the downlink and 50Mbits/s in the uplink. In LTE, the concept of self-optimization includes optimization of coverage, capacity, handover and interference. During Handover, in the dense deployment of femtocells, the issues of cell selection and reselection need to optimize. The mobile broadband networks support multiple applications like voice, data, video and email, single IP-based infrastructure. These applications have unique traffic challenging and Quality of Service requirements. In the LTE network the bandwidth is distributed among all the users and active applications using rate requirement of user equipment (UE). To increase user satisfaction in terms of rate of applications, the bandwidth allocation among applications needs to be optimized by dynamic scheduling. The objectives which we focused are Handover optimization and bandwidth optimization in the LTE integrated with femtocell networks. Aiming to our objective we proposed Dynamic Cell Selection (DCS) mechanism for handover optimization and Efficient Bandwidth Distribution (EBD) mechanism for allocating dynamic bandwidth to applications. We can perform the simulation of DCS and EBD mechanism in the NS-3 or similar simulation software to evaluate the performance of these algorithms. The real time experimentation of these mechanisms using Software Defined Radio is also possible. For real time set-up, possible supported technical tools are Xilinx(R) Zynq-Based Radio Support Package, Analog Devices AD9361 and LTE System Toolbox of MATLAB.

 

Author(s) Details

Anita B. Jadhav

1Ramrao Adik Institute of Technology (RAIT), Nerul, Mumbai, India.

 

Y. Srinivasa Rao

3Sardar Patel Institute of Technology (SPIT), Andheri, Mumbai, India.

 

Please see the book here :- https://doi.org/10.9734/bpi/etert/v5

5th Generation Wireless Communication Revolution: A Recent Study | Chapter 9 | Novel Perspectives of Engineering Research Vol. 3

 In the smallest amount of time, the entire world is moving at breakneck pace. The goal of this essay is to illustrate the characteristics of future 5G technology. The speed of technology has increased from 1 G to 4G. Although the bad and good features of 5G technology have yet to be discussed, the argument has already begun. 5 G is a fully functional wireless communication system with few constraints. 5 G is predicted to usher in another another revolution by providing extremely fast internet speeds. It is in favour of WWWW. The real wireless world, according to some, is 5 G. Each generation, however, has benefits over the others. The introduction of 5G marks a paradigm shift in thinking. A wearable gadget having artificial intelligence capabilities can be characterised as the fifth generation. Thanks to 5G, everything will be protected and monitored automatically. An attempt has been made to discuss aspects of 5G and associated characteristics in this endeavour.

Author(S) Details

Shafiqul Abidin
Department of Computer Science, Aligarh Muslim University, Aligarh -202002, Uttar Pradesh, India.

Mohd Izhar
Department of Computer Science and Engineering, HMRITM (Affiliated with Guru Gobind Singh Indraprastha University), Delhi, India.

Vikas Rao Vadi
Don Bosco Technical School (Affiliated with Guru Gobind Singh Indraprastha University), New Delhi, India.

View Book:- https://stm.bookpi.org/NPER-V3/article/view/4760

Device to Device Mobile Communication with Novel Key Exchange Protocol | Chapter 12 | Current Approaches in Science and Technology Research Vol. 3

 The model decomposition and iteration techniques in Stochastic Petri Nets (SPNs) are used to derive its approximate steady state solution, which is used to obtain the approximate performance metrics of D2D communications in terms of average queue length, mean throughput, average packet delay, and packet dropping probability of each link. Simulations are carried out to validate the analytical results under various traffic loads and interference conditions. The protocol we're using here is the Novel Key Exchange Protocol. The goal of this technique is to present advancements on the current 3GPP LTEadvanced system in terms of Device-to-Device communication (D2D).

Author(s) Details

S. M. Asha Banu
Department of Electronics and Communication Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, India.

Professor D. Mohana Geetha
Sri Krishna College of Engineering and Technology, Coimbatore, India.

Dr. V. Nandalal
Department of Electronics and Communication Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, India.

View Book :- https://stm.bookpi.org/CASTR-V3/article/view/1417

Bandwidth Distribution Algorithm of Applications in LTE-Femtocell Network: Advanced Study | Chapter 4 | Emerging Trends in Engineering Research and Technology Vol. 5

The wireless technology demand is growing exponentially for higher data rate more than 1Gbit/s. The capacity of wireless networks must grow continuously in order to satisfy the demand of traffic from users and applications. Long-Term Evolution (LTE) and LTE-Advanced (LTE-A) have been standardized by 3GPP to target data rate of 100Mbits/s in the downlink and 50Mbits/s in the uplink. In LTE, the concept of self-optimization includes optimization of coverage, capacity, handover and interference. During Handover, in the dense deployment of femtocells, the issues of cell selection and reselection need to optimize. The mobile broadband networks support multiple applications like voice, data, video and email, single IP-based infrastructure. These applications have unique traffic challenging and Quality of Service requirements. In the LTE network the bandwidth is distributed among all the users and active applications using rate requirement of user equipment (UE). To increase user satisfaction in terms of rate of applications, the bandwidth allocation among applications needs to be optimized by dynamic scheduling. The objectives which we focused are Handover optimization and bandwidth optimization in the LTE integrated with femtocell networks. Aiming to our objective we proposed Dynamic Cell Selection (DCS) mechanism for handover optimization and Efficient Bandwidth Distribution (EBD) mechanism for allocating dynamic bandwidth to applications. We can perform the simulation of DCS and EBD mechanism in the NS-3 or similar simulation software to evaluate the performance of these algorithms. The real time experimentation of these mechanisms using Software Defined Radio is also possible. For real time set-up, possible supported technical tools are Xilinx(R) Zynq-Based Radio Support Package, Analog Devices AD9361 and LTE System Toolbox of MATLAB. 

Author(s) Details

Anita B. Jadhav
Ramrao Adik Institute of Technology (RAIT), Nerul and Usha Mittal Institute of Technology (UMIT), SNDT Women's University (SNDTWU), Mumbai, India

Dr. Y. Srinivasa Rao
Sardar Patel Institute of Technology (SPIT), Andheri, Mumbai, India

View Book :- http://bp.bookpi.org/index.php/bpi/catalog/book/187